Jiangsu Jingtai Glass Co.,Ltd

Low E Glass

Low E Glass

"Low-E Glass" refers to a series of high-performance low-emissivity products. The vacuum sputtering process coats glass surfaces with several layers of different materials. Among these, a silver layer effectively reflects infrared rays while maintaining excellent thermal performance.

Types of Product

Single Low-E Glass (SLE)

Double Low-E Glass (DLE)

Low-E-Sun Layer Glass (LES)

Ti-based Low-E Glass (TLE)


Thickness: 3~19mm;

Max. size: 3300mm x 6000mm;

Min. size: 300mm x 300mm;

Low-E insulating glass

    max. size: 3300mm x 4880mm.


Approaches the natural color of glass.

Highly transparent to visible light (wavelength 380nm~780nm), will not cause significant glare problems due to high reflectance of visible light.

Allows most sunlight in the visible range to enter without altering its natural color. Provides excellent natural illumination and saves energy by reducing the need for artificial lighting. 

Relatively high reflectance of infrared radiation (wavelength 780nm~ 3,000nm). In particular, reflects nearly all long-wave infrared (wavelength over 3,000nm). Blocks the entrance of large amounts of heat, and leaves interior comfortably cool in the summer and warm in the winter.

Notes on Design and Glazing

Low-E glass cannot be used as a single glazing and must be sealed or processed into insulating glass unit within a very short time as the metallic oxide coating is prone to undesirable reactions once exposed to air;

Emissivity of Low-E insulating glass is 0.02 ~ 0.11, while that of uncoated glass is 0.84;

In tropical or subtropical areas, the Low-E coating should be positioned on #2 surface (facing inward from outside the building), while positioned on #3 surface in temperate areas;

To avoid deterioration and fogging of the glass due to water accumulation, the metal holding frames must be well drained;

Low-E glass designed for laminated glass unit will be under a greater U-value and poorer thermal insulating capability;

To identify the coating surface of Low-E glass, aside from looking for the mark, use a cigarette lighter to inspect the surface of the glass. Reflection of the flame on ordinary glass surface will be yellow, while pink or blue on Low-E glass surface;



View as :

Currently, there is no product exhibited in Low E Glass

View as :

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Amy Zhang
Jiangsu Jingtai Glass Co.,Ltd
* Subject
* Message

Use English only Max. 2000 characters. (Min. 20)

EC21.com does not guarantee the validity of product information or the credentials of sellers.